The high voltage ARNOLD MAT vises keeps its length, regardless of the size of the parts, making it suitable for machining centers (vertical and horizontal).
– 0.01 mm clamping repeatability accuracy.
– Monoblock design avoids deformation due to high pressure and has strong stiffness and robustness.
– suitable for working in horizontal and vertical machining centers.
– all surfaces have parallel and vertical 0.02 mm grinding.
– possible job location: support on the base, in the side or in the vertical direction.
– the side window quickly washes the internal vise.
– can be supplied or used by four standard clamps to the table with four screws located in the body.
The clamping force is 25/40/50 kN, depending on the model.
– equipped with high pressure hydraulic enhancer, no external power supply is required.
— the power regulator is optional.
– the Angle of the clearance at the request is driven.
Arnold MHB2
Insoles vise – the lowest level of the economic model
Interchangeable front and back jaws for optimal versatility
Hydraulic and mechanical versions up to 11,000 pounds. 5 “and 6.5” jaw width pressure
The high voltage ARNOLD MHB2 vises is the most flexible vises. Regardless of the size of the artifact, they maintain a constant length.
– 0.01 mm clamping repeatability accuracy.
– can be clamped to the table by using four standard clips or using four screws inside the body.
– works in horizontal and vertical machining centers.
– flexible design: all jawbones of MHB2 are interchangeable.
– quick cleaning of side Windows.
– clamping force 40/50 kN depends on the model.
— the power regulator is optional.
– the Angle of the clearance drive.
– tighten the large workpiece to fit larger pieces.
– equipped with high pressure mechanical intensifier.
— the power regulator is optional.
– the Angle of the clearance at the request is driven.
– split vise is available as a standard project.
