Arnold Durmak
MHB2 clamp capability with better clamping variability
A fixed and moving jaw, flat added jig/fixture
The mechanical enhancer can provide a weight of 11,000 pounds. 5 inches and 6.5 inches of pressure
The high voltage ARNOLD MHB2 vises is the most flexible vises. Regardless of the size of the artifact, they maintain a constant length.
– 0.01 mm clamping repeatability accuracy.
– can be clamped to the table by using four standard clips or using four screws inside the body.
– works in horizontal and vertical machining centers.
– flexible design: all jawbones of MHB2 are interchangeable.
– quick cleaning of side Windows.
– clamping force 40/50 kN depends on the model.
— the power regulator is optional.
– the Angle of the clearance drive.
– tighten the large workpiece to fit larger pieces.
– applicable to hard – mounted work. The insertion position determines the clamping capability of the vice.
– fixed jaw, several insert Settings. Movable jaw with several insert Settings.
– equipped with high pressure mechanical intensifier.
— the power regulator is optional.
– the Angle of the clearance drive.
– split options as required.
Arnold’s twins
High pressure clamping between two workpieces
The 3rd-hand function allows each piece to be sandwiched between two stages
The whole ground perimeter guarantees parallelism and verticality, ensuring side and end mounting
The hydraulic booster can provide a weight of 11,000 pounds. 3.5 “and 5.0” jaw width pressure
The high voltage ARNOLD TWIN vises can hold two pieces at the same time.
– 0.01 mm clamping repeatability accuracy.
– works in horizontal and vertical machining centers.
– all surfaces have parallel and vertical 0.02 mm grinding.
– possible job location: support on the base, in the side or in the vertical direction.
– the side window quickly washes the internal vise.
– clamping force 25/50 kN, depending on size.