– the model does not require high pressure external components, which often makes it difficult to process 5X.
– the power regulator can be used in the M.
– equipped with high pressure mechanical intensifier.
– quick cleaning and dusting of side Windows.
– customize the jaw according to the shape of the workpiece.
The size of the m
— the power regulator is optional.
Size L
— the power regulator.
– bigger fixtures than M.
Arnold SC
Standard hydraulic oil with hydraulic spindle and rotary base
Automatic centering, without high pressure clamp
High installation screw can maximize clamping force and minimize jaw deflection
Precision of centering. 0007″
Small floor area for 2.5 x 2.75 “, 3.5 “and 5.0”
ARNOLD SC vises is compact, high and self-centered, maintaining a constant length.
– 0.01 mm clamping repeatability accuracy.
– accuracy 0.02 mm.
– design the small table for processing center and 5 control shaft machining center.
– compact design to avoid deformation because clamping force is distributed throughout the width.
— steel components.
– hidden vise: completely closed to prevent chip entry.
– threaded right – left spindle can be operated using standard key.
– clamping force from 10 to 35 kN depends on the model.
– interchangeable jaws can reach a height of 125 mm, which means they can overcome the biggest obstacles to such work by avoiding collision with the machine’s main axis or rotation of tables.
– all standard jaws can be used with a soft palate.
– applies to clamping round workpieces.
– the bottom board can be used to enhance vice.
– mechanical shaft, no high pressure.
– the jaw can rotate: large clamps, double jaw position.
– grease spots allow the vise to remain in optimum condition.
Special chin
The soft palate can be processed according to the shape of the workpiece.
Arnold SHC 5 x
