The maximum clamping force is 9000 LbF(40kn) and the clamping width is 6.7 (171mm).
Suitable applications:
Horizontal installation vertical milling machine, vertical control
Horizontal installation is also possible
Allmatic GRIPP series
Clamp clamp on six options for complex unprocessed parts
A flexible model allows an ordinary clip, clamp or pull down
Jig is suitable for materials with certain strength. 1,000 bull/square millimeter
Tyrannosaurus rex is an ideal unprocessed part
Titan SC 125 is designed for fast processing of finished products.
The CENTRO Gripp Vise of self-centering allows the workpiece to go through the whole process from beginning to end
Vertical three-axis machining center universal device
Due to the lower jaw, the Titan SC 125 has the precision required to process the workpiece
Fully enclosed gripp spindle clamp and molding material
High – voltage spindle and mechanical power amplifier allow clamping work plate
Stabilize GGG 60 valve body, grounding top and bottom
Two M8 threads are used to stop the workpiece
The accurate track is on the ground, with the best alignment of the machining table
Click on the quick change system to connect the lower jaw and click parallels
Suitable applications:
Common vertical three-axis machining center fixture
Traditional clamping and clamping are possible
Clamp the raw material in the workpiece, burning and sawing, insert hard interchangeable clip into the workpiece
The length of the three pieces – each with its traditional and clamped grip – makes Titan 2 a flexible option
It is a widely used modular clamping system
Titan 2 M is ground breaking
Titan 2 K and M can be used vertically
High – voltage spindle power enhancement. The clamping force is not slack
The expanded clamping span is used to ensure that the unprocessed parts are securely clamped
Suitable applications:
Horizontal or vertical applications – therefore suitable for vertical and horizontal CHNC milling machines
