HSN serise

HSN – 1300 the latest engineering nitride cutting tool has excellent toughness and high speed cutting speed. The rotation and milling of various cast iron. HSN – 1300 is a good choice for toughness, ductility, ductile iron and other hard iron. HSN – 23300 latest coating silicon-nitride cutting tools have excellent toughness, long knife life and excellent surface finish.

HSN – 2300 is a good choice for rotating and milling ductility, ductility, ball type and other high alloy cast-iron castings. Gem – 7 Al2O3 + TiC composite ceramics, with high roll rotation and hard alloy (up to 65 R/c) processing predictability.

The sintering Al2O3 ceramics of jingang – 19 cold-pressed sintering has been processed and processed on the basis of serious discontinuity or old machinery.

drilling

Holemill is a transposed bit that USES advanced coatings of green blades to improve speed, quieter cuts, longer tool life and reduced horsepower consumption. Insert is the square of each inserted four index (SPMT). The diameter of Holemill is 1 to 3 times the increment of 1/8.

Other hole machine

Operational information

In order to achieve the best effect of static drilling, install in the turret of green vane hole with drilling grinder, insert and parallel machine, insert the position of the insert, as shown in the figure.

Tube scarf

GL system adopts modern pipeline nested indexable inserts, greatly improving the productivity, reduce downtime, extended the tool life, shorten the tool change time, reduce the tool cost, eliminates the grinding problem again. In addition, you can expect to have better seam because each side of the insert has an exact radius.

carbide

GL provides a hard alloy blade from sub-micron c-1 to c-8. As a pioneer in the coating industry, GL provides various coatings, coatings and coatings

end mill

Milling cutter

Peel the bar

Use advanced 3 d modeling and CHNC manufacturing equipment engineering system, GL is one of the few cutting tool manufacturers, through the tool cutting tools inserta completed system to meet your requirements to provide a strip solution.

Milling cutter

Hushcut II milling cutter is an ideal power limitation or harmonic vibration. An advanced chip design with a combination of ADGT/APHT screw insertion and free-cutting pocket geometry, resulting in longer insert life and improved surface finishes.

The GL professional milling cutter has a screw in the insertion design to facilitate insertion of the index and maximum chip clearance. Applications include center 45 ° oblique cutting, cutting and ball nose end mill.

The g-93325 multi-layer PVD coating grade is specially used for processing enzymes and difficult materials. Typical applications include high temperature alloys, titanium and other refractory metals, stainless steel and many cast iron.

G-93325 has good anti-concave and deformation. Suitable for medium to high speed, moderate feed.

Carbide continuous

Smear, peripheral vascular disease

The g-93335 multilayer PVD coated steel plate milling and flipping applications require additional resistance to mechanical and thermal shock. The multi-layer PVD coating improves the speed and wear resistance of milling.

naked

The g-2330m A micron c-32 carbide is suitable for rotation and milling of titanium and nickel base superalloys. In the high-strength material steering, g-20m has the strength and edge wear characteristics.

Metal ceramic

GL is a leader in the development and manufacture of ceramic and coated ceramics in ANSI standards and special geometric shapes. Highlights include:

The wg-33300 patent requires the improvement of the abrasion resistance and high surface velocity of ceramic materials. The wg-33300 is very effective in treating superalloys of hard materials such as nickel and cobalt

The removal rate of metals is 10 times higher than carbide. Wg-63300 is the only commercial second-generation coated ceramic composite cutter with whisker reinforcement. Good at processing high-strength alloy materials.

drilling

Hsn-2300 is a good choice for rotation and milling ductility, ductility, ball type and other high alloy cast-iron castings. Gem – 7 Al2O3 + TiC composite ceramics, with high roll rotation and hard alloy (up to 65 R/c) processing predictability.

The sintering Al2O3 ceramics of jingang – 19 cold pressed sintering has been processed and processed economically in severe discontinuity or old machinery.

drilling

Holemill is a transposed bit that USES the advanced coating of green leaves to improve speed, quieter cuts, longer tool life and reduced horsepower consumption. Insert is the square (SPMT) of each inserted four index. Holemill has 1 to 3 times the diameter of 1/8 increments.

Another hole machine

Operational information

In order to achieve the best effect of static drilling, installed in the turret of a green leaf pores with drill grinding machine, place the insert and the way of parallel machine, and insert the plug-in will be inserted into the operator’s position, as shown.

Tube scarf

GL modern pipe nested systems use indexable inserts, greatly improving the productivity, reduce downtime, prolong tool life, shorten the tool change time, reduce the tool cost and eliminate resharpening problem. In addition, you can expect to have a better seam because there is an exact radius on each side of the insert.

carbide

GL provides a hard alloy blade from sub-micron c-1 to c-8. As a coating carbide industry pioneer, GL provides a variety of coatings, coatings and coatings

PVD coated grades. The carbide blade can be processed in rough with a multipurpose fractal in the ANSI standard geometry.

coating

Ga-53025 A CHVD ceramic coating grade provides excellent heat resistance and long tool life.

cermet

Greenliff is a leader in the development and manufacture of ceramic and coated ceramics in ANSI standards and special geometric shapes. The highlights include:

Gem-19 is a high-speed Al2O3 ceramic level and requires completion of requirements.

end mill

turning and milling of high strength alloys

The g-9320 PHVD coating grades are used for high strength materials such as turning and milling of high strength alloys, titanium and stainless steel. The g-9320 is also an excellent grade for aluminum and refractory metals. This level has the ability to resist deformation and punch and requires a higher speed than g-9310.

The g-9325 multi-layer PVD coating grade is specially used for processing enzymes and difficult materials. Typical applications include high temperature alloys, titanium and other refractory metals, stainless steel and many cast iron.

G-9325 has good anti-concavity and deformation. Suitable for medium to high speed and moderate feed.

Hard alloy continuous

Smear, peripheral vascular disease

The g-9335 multi-layer PVD coated steel plate milling and flipping applications require additional resistance to mechanical and thermal shock. Multi-layer PVD coating improves the speed and wear resistance of milling.

naked

The g-230m A micron c-32 carbide is suitable for the rotation and milling of titanium and nickel-base superalloys. The g-20m has the strength and edge wear characteristics in high strength material steering.

cermet

Greenliff is a leader in the development and manufacture of ceramic and coated ceramics in ANSI standards and special geometric shapes. The highlights include:

Wg-3300 patents are required to enhance ceramics, with excellent wear and impact high surface velocity. The wg-3300 is very effective in processing the superalloys of nickel and cobalt and other hard materials

The removal rate of metals is 10 times higher than carbide. The wg-6300 is the only commercial second-generation coated ceramic composite cutter with whisker reinforcement. Good at finishing high strength alloy material.

HSN – 100 latest engineering silicon nitride cutting tools have excellent toughness and high cutting speed capability. Rotation and milling of various cast iron. Hsnt-1300 is a good choice for toughness, ductility, ductile iron and other difficult iron. Hsn-2300 latest coating silicon-nitride cutting tools provide excellent toughness, long tool life, and excellent surface finish.

Rotation and milling

Rotation and milling of various cast iron. Hsnt-1300 is a good choice for toughness, ductility, ductile iron and other difficult iron.

Gem – 7 Al2O3 + TiC composite ceramics, with high roll rotation and hard alloy (up to 65 R/c) processing predictability.

Slot, profile and cut-off

GL provides the most comprehensive groove, anatomy and cut-off in the industry. Each application in the workshop can use this unique tool system to accommodate ceramic and carbide blades.

carbide

GL provides a hard alloy blade from sub-micron c-1 to c-8. As a coating carbide industry pioneer, GL provides a variety of coatings, coatings and coatings

PHVD coated grades. The carbide blade can be processed in rough with a multipurpose fractal in the ANSI standard geometry.

Coating – CHVD

High speed rail – 53025 high speed steel – clad turning, light processing, carbon steel and alloy steel polishing, and selection of stainless steel.

Ga-53026 is a rapid development of superalloys, stainless steel and refractory metals for nickel and cobalt bases. The advanced mt-chvd coating has high abrasion resistance on microparticle substrate. Ga-53026 has special resistance to the tooth groove and deformation of high-strength materials.

It is used in high speed and light feed for milling applications. Ga-53035 is a high-performance CHVD coating grade for rotating all types of steel and choosing stainless steel. Ga-53035 can be used for rough and semi-finishing, which can be used to resist thermal deformation, thermal shock and wear. Ga-53035 should be suitable for high speed and a range of feed.

Smear, peripheral vascular disease

G – 9315 multi-layer PHVD coating grade for milling and rotating high temperature alloy, stainless steel and low carbon steel. The multi-layer PHVD coating increases heat resistance and wear resistance, making it have an impact resistance. G-9315 should run at medium speed and run at medium speed in the application of milling and interrupts.

end mill for stainless steel

H-9335

The multilayer PHVD coating increases heat resistance and wear resistance, making it have an impact resistance. H-9315 should run at medium speed and run at medium speed in the application of milling and interrupts.

The H-9335 multi-layer PHVD coated steel plate milling and flipping applications require additional resistance to mechanical and thermal shock. Multi-layer PHVD coating improves the speed and wear resistance of milling.

G – 9355 multi-layer PHVD coating grade, mainly used for high productivity milling of rough steel forgings, mainly used in tool steel. In addition, the g-9355 provides an excellent tool life in semi-finishing and completed operations, where toughness and wear resistance are required

carbide

naked

G – 320m A micron G-2 carbide grade, suitable for rotating and milling titanium and nickel-base superalloys. The g-320m has the strength and edge wear characteristics when the high strength material is turned. G – 350 coarse grinding grades of steel and steel castings under difficult conditions are ferritic stainless steel in most applications. The G-350 is strong enough to use a positive rake to make a turn.

Roughing or grading of steel and steel castings.

The G-734 has a higher impact resistance than theG-730 and should be used in high speed and moderate to heavy feed. It is suitable for turning the steel ring.

cermet

Greenliff is a leader in the development and manufacture of ceramic and coated ceramics in ANSI standards and special geometric shapes. The highlights include:

W-3300 patents are required to enhance ceramics, with excellent wear and impact high surface velocity. The wg-300 is very effective in processing the super alloys of nickel and cobalt, as well as other hard materials, and the removal rate of metals is 10 times higher than carbide.

HSN – 1300 the latest engineering silicon nitride cutting tool has excellent toughness and high cutting speed capability.

end mill

Turn the heavy

Turn the heavy

Ceramic cutting tools, such as the luye gem-7 composite and wg-300 whiskers, combine with a sturdy, well-designed support system to produce a green leaf blade system.

carbide

GL provides a hard alloy blade from sub-micron c-1 to c-8. As a coating carbide industry pioneer, GL provides a variety of coatings, coatings and coatings

PHVD coated grades. The carbide blade can be processed in rough with a multipurpose fractal in the ANSI standard geometry.

coating

A high – speed performance grade for rotating and milling cast iron. H-35023 has an advanced mt-chvd coating for enzyme abrasion resistance. The application range includes coarse iron materials, including gray cast iron, ductile iron, nodular cast iron and other alloy cast iron materials. H-35023 high wear and impact resistance allows processing in high speed and multiple feeds.

H-35035 is a high-performance CHVD coating grade for rotating all types of steel and choosing stainless steel.

H-35035 can be used for rough and semi-finishing, which can be used to resist thermal deformation, thermal shock and wear. H-35035 should apply to high speed and a range of feeds.

High performance a coating for high performance of milling steel. H-35036 should be used when milling forging and casting steel and selected ductile irons. H-35036 has unique toughness and heat resistance, making it suitable for heavy duty and light milling with high cutting speed.

H-35040 is a hard shell coating for low speed, high feed carbon steel and alloy steel, cast iron and cast iron. Other applications of ga-35040 include milling and interruption of stainless steel rotation and selection of high temperature alloys.

This multi-layer CHVD coating is rated in severe machining applications and requires resistance to mechanical shock. G – 9315 multi-layer pHvd coating grade for milling and rotating high temperature alloys, stainless steel and low carbon steel.

H speed

H speed is used.

The h-20m A micron c-2 carbide is suitable for the rotation and milling of titanium and nickel-base superalloys.

H-20m has strength and edge wear characteristics when high strength material is turned.

cermet

Greenliff is a leader in the development and manufacture of ceramic and coated ceramics in ANSI standards and special geometric shapes. The highlights include:

The wg-3400 patent is required to enhance ceramics with excellent abrasion and high surface velocity. The wg-3400 is very effective in processing the superalloys of nickel and cobalt, as well as other hard materials, and the removal rate of metals is 10 times higher than carbide.

Wg-6400 is the only commercial second-generation coated ceramic composite cutter with whisker reinforcement. Good at finishing high strength alloy material.

HSN – 1400 latest engineering silicon nitride cutting tools have excellent toughness and high cutting speed capability. Rotation and milling of various cast iron. HSNT – 1400 is a good choice for toughness, ductility, ductile iron and other difficult iron. Hsn-2400 latest coating silicon-nitride cutting tools provide excellent toughness, long tool life, and excellent surface finish.

HSN – 2400 is a good choice for rotation and milling ductility, ductility, ball type and other high alloy cast-iron parts. Gem – 7 Al2O3 + TiC composite ceramics, with high roll rotation and hard alloy (up to 65 R/c) processing predictability.

The sintering Al2O3 ceramics of jingang – 19 cold pressed sintering has been processed and processed economically in severe discontinuity or old machinery.

Csn-1400 is the latest cold pressure technology in the silicon nitride ceramics market. GL provides groove insertion in the 80-degree and square interpolation geometry. CHSN is a good choice for high-speed grey cast iron. Csn-2400 is the latest cold-stamping technology in the silicon nitride ceramic market. GL provides groove insertion in the 80-degree and square interpolation geometry. CHSN is a good choice for high-speed grey cast iron.

high cutting speed

H-5036 has a unique toughness and heat resistance, which makes it suitable for heavy duty and light milling of high cutting speed.

H – 5040 for low speed, high feed of carbon steel and alloy steel, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron, cast iron

Other applications of h-5040 include milling and interruption of stainless steel rotation and selection of high temperature alloys. This multi-layer CHVD coating is rated in severe machining applications and requires resistance to mechanical shock.

Smear, peripheral vascular disease

G – 915 multilayer PHVD coating grade for milling and rotating high temperature alloys, stainless steel and low carbon steel. The multilayer PHVD coating increases heat resistance and wear resistance, making it have an impact resistance. H-915 should run at a moderate speed and run at medium speed in applications that are milling and cutting corners.

The h-920 PHVD coating grade is used for high strength materials such as turning and milling of high strength alloys, titanium and stainless steel. H-920 is also an excellent grade for aluminum and refractory metals. This level has the ability to resist deformation and punch, demanding a higher speed than h-910.

The h-925 multi-layer PHVD coating grade is specially used for processing enzymes and difficult materials. Typical applications include high temperature alloys, titanium and other refractory metals, stainless steel and many cast iron. G-925 has good anti-concave and deformation. Suitable for medium to high speed and moderate feed.

naked

H-02 is an excellent general grade for various types of cast iron processing. G-02 should be used in appropriate speed and feed. Also suitable for high temperature alloy, stainless steel and aluminum finish and polishing.

H-5022 H- 5025 H-5026 H-5035

GL provides a hard alloy blade from sub-micron c-1 to c-8. Pioneer in coating carbide industry,

Green leaves provide a wide variety of uncoated, lacquered and painted

PHVD – coated grades. Carbide blade can be in

ANSI standard geometry and multi – purpose crushing

For rough grinding.

Coating – CHVD

H-5022 a common CHVD coating grade for rotation and milling of cast iron at high speed and medium feed rate. Develop to handle medium roughing to complete operation. H-5022 provides high wear resistance and moderate strength mechanical shock.

A high – speed performance grade for rotating and milling cast iron. Gha-5023 has an advanced mt-chvd coating for enzyme wear resistance.

The application range includes coarse iron materials, including gray cast iron, ductile iron, nodular cast iron and other alloy cast iron materials. The high wear and impact resistance of h-5023 is allowed to be processed in high speed and multiple feeds.

H- 5025 high speed steel coated turning, light processing, carbon steel and alloy steel polishing, and selection of stainless steel.

H-5026 is a high-speed development that is used to produce nickel-cobalt alloys, stainless steel and refractory metals. The advanced h-chvd coating has high wear resistance on microparticle substrate. Ga-5026 has special resistance to the tooth groove and deformation of high-strength materials. It is used in high speed and light feed for milling applications.

H-5035 is a high-performance CHVD coating grade for rotating all types of steel and choosing stainless steel.

H-5035 can be used for rough and semi-finishing, which can be used to resist thermal deformation, thermal shock and wear. H-5035 should apply to high speed and a range of feed.

High performance a coating for high performance of milling steel. H-5036 should be used when milling forging and casting steel and selected ductile irons.

end mill