Category Archives: 未分类

Therefore, any metal cutting operation should be performed in a completely closed (shielded) environment to prevent damage from flying objects. After purchase, DPA does not bear any loss, damage or expense of any use or disposal of our products. Grinding produces harmful dust. To avoid adverse health effects, use appropriate ventilation and reading material safety […]

There is a sharper edge (Angle) on the shoulder tool, and excessive vibration creates the potential for whittling, which can lead to catastrophic failure. The button cutter provides good metal removal on less rigid machines for two main reasons. First, the rounded blade is stronger than the sharp square shoulder blade. This greater intensity allows […]

In these cases, the metal removal rate is far greater than the capacity of most of the shoulder tools, but the power consumption will increase proportionally. However, in most cases, when the horsepower is sufficient, the shoulder tool is better than a button cutter. This observation comes from the fact that a square shoulder insertion […]

The wrong answer may result in spending extra time in the rough process, resulting in loss of revenue at work, and, worse, a backup of tasks on the same machine. In addition, using the wrong tool to coarsen causes a headache for the final operation, and it takes an extra time to balance the remaining […]

There is a sharper edge (Angle) on the shoulder tool, and excessive vibration creates the potential for whittling, which can lead to catastrophic failure. The button cutter provides good metal removal on less rigid machines for two main reasons. First, the rounded blade is stronger than the sharp square shoulder blade. This greater intensity allows […]

However, in most cases, when the horsepower is sufficient, the shoulder tool is better than a button cutter. This observation comes from the fact that a square shoulder insertion usually has a cutting edge length of 15-17 mm, which maintains a uniform thickness of the chip in the cross-section of the chip. A key cutter […]

The wrong answer may result in spending extra time in the rough process, resulting in loss of revenue at work, and, worse, a backup of tasks on the same machine. In addition, using the wrong tool to coarsen causes a headache for the final operation, and it takes an extra time to balance the remaining […]

Applications that need a lot of metal removal can be through the use of an aggressive cutting depth and a medium feed to successfully processed, or using a light cutting depth and super aggressive feed. Both achieve high metal removal rates, but also provide different types of machine tools. Older, more powerful machines can respond […]

What kind of scene would you like? The answer to this question is difficult in real-world processing environments, and most shops fall somewhere between the extremes. Add value to Consider the three performance values of the cutter to determine the processing cost and determine the appropriate processing solution: The time required for the work cutting […]

In a program designed to benefit mill operators with varying skill levels, two days of intensive courses have been reduced to as many as 14, allowing one-to-one support. “We’re not just talking about two days of milling technology and formula,” says Mr Bitner. “We conducted a practical demonstration on machine tools, to create a team, […]