tool serise

– the model does not require high pressure external components, which often makes it difficult to process 5X. – the power regulator can be used in the M. – equipped with high pressure mechanical intensifier. – quick cleaning and dusting of side Windows. – customize the jaw according to the shape of the workpiece. The […]

Special chin

Special chin – the soft jaw can be processed according to the shape of the workpiece. – equipped with high pressure hydraulic enhancer, no external power supply is required. – the Angle of the clearance at the request is driven. – 6 different types of clamps, swap the standard jaw position: either rotate the side […]

MHB2

Arnold Durmak MHB2 clamp capability with better clamping variability A fixed and moving jaw, flat added jig/fixture The mechanical enhancer can provide a weight of 11,000 pounds. 5 inches and 6.5 inches of pressure The high voltage ARNOLD MHB2 vises is the most flexible vises. Regardless of the size of the artifact, they maintain a […]

high voltage ARNOLD MAT vises

The high voltage ARNOLD MAT vises keeps its length, regardless of the size of the parts, making it suitable for machining centers (vertical and horizontal). – 0.01 mm clamping repeatability accuracy. – Monoblock design avoids deformation due to high pressure and has strong stiffness and robustness. – suitable for working in horizontal and vertical machining […]

Hard steel

Only use appropriate grinding tips and grinding blades. This increases the smoothness of the scratch surface, making it easier to scrape. Only when the surface is cleaned, shaved once or twice, and the whole surface “carries” the bearing point (” point “). Hard steel can only be scraped with hard alloy blades and negative cutting […]

End milling cutter

Example: if you use 1 “dia”. End milling cutter. 100 “WOC, WOC = 10% of cutting diameter. Using the above chart, the chip thickness factor = 1.7. If the thickness of a chip. What is needed is the feeding speed. 0085 “(. It should be programmed on the machine tool. Or the adjusted per tooth […]

cutting edge

It is recommended that you climb the mill whenever possible. Using a larger angular radius, it is the sharpest cutting edge in rough cutting applications. When cutting width (WOC) is less than 50% of cutting diameter, compensate radial chip (see below). Because our party shoulder tool to cut a real 90 °, they are a […]

PVD process optimization

The popular PVD coating process is to separate atoms from a Ti target or a TiAl target as a cathode by arc discharge and then deposit on the surface of the tool to form a coating. This method was first applied to nitride coatings. In order to obtain a smooth coating surface, began using the […]