Hsn-2300 is a good choice for rotation and milling ductility, ductility, ball type and other high alloy cast-iron castings. Gem – 7 Al2O3 + TiC composite ceramics, with high roll rotation and hard alloy (up to 65 R/c) processing predictability.
The sintering Al2O3 ceramics of jingang – 19 cold pressed sintering has been processed and processed economically in severe discontinuity or old machinery.
drilling
Holemill is a transposed bit that USES the advanced coating of green leaves to improve speed, quieter cuts, longer tool life and reduced horsepower consumption. Insert is the square (SPMT) of each inserted four index. Holemill has 1 to 3 times the diameter of 1/8 increments.
Another hole machine
Operational information
In order to achieve the best effect of static drilling, installed in the turret of a green leaf pores with drill grinding machine, place the insert and the way of parallel machine, and insert the plug-in will be inserted into the operator’s position, as shown.
Tube scarf
GL modern pipe nested systems use indexable inserts, greatly improving the productivity, reduce downtime, prolong tool life, shorten the tool change time, reduce the tool cost and eliminate resharpening problem. In addition, you can expect to have a better seam because there is an exact radius on each side of the insert.
carbide
GL provides a hard alloy blade from sub-micron c-1 to c-8. As a coating carbide industry pioneer, GL provides a variety of coatings, coatings and coatings
PVD coated grades. The carbide blade can be processed in rough with a multipurpose fractal in the ANSI standard geometry.
coating
Ga-53025 A CHVD ceramic coating grade provides excellent heat resistance and long tool life.
cermet
Greenliff is a leader in the development and manufacture of ceramic and coated ceramics in ANSI standards and special geometric shapes. The highlights include:
Gem-19 is a high-speed Al2O3 ceramic level and requires completion of requirements.